AT-LED-24V Driver and Light Kits

AT-LED-24V Driver and Light Kits

Lighting, Technical Center, Technical Center Featured, Uncategorized

Home » PoE Lighting

AT-LED-24V Installation and Configuration Manual

Welcome to the PoE Texas Manual for the AT-LED-24V, AT-LED-24V-STRIP, AT-LED-24V-DISC, AT-LED-24V-BULB, AT-LED-24V-COB line of products!

The purpose of the manual is to help you quickly and effectively install and configure your new AT-LED-24V  kit.

Our goal is to make our products as intuitive and simple to use as possible, so we value your feedback and questions directly to us at service@poetexas.com.  Phone +1-512-479-0317.

Or you’re always welcome to leave questions or comments on our product pages: AT-LED-24V.

What’s Inside

PARTS LIST: AT-LED-DRIVER

  • AT-LED-24V PoE to LED driver
PARTS LIST: AT-LED-24V-STRIPS

  • AT-LED-24V PoE to LED Driver
  • 1 x AT-WS-1 Wireless wall switch
  • 1 x 2.2m 3200K LED Light Strip
PARTS LIST: AT-LED-24V-BULBS

  • AT-LED-24V PoE to LED Driver
  • 1 x AT-WS-1 Wireless wall switch
  • 3 x 2700K LED Light Bulbs
  • 2 x wire connectors
PARTS LIST: AT-LED-24V-DISC

  • AT-LED-24V PoE to LED Driver
  • 1 x AT-WS-1 Wireless wall switch
  • 2 x 6500K LED Disc Lights
  • 2 x wire connectors
Parts Lists: AT-LED-24V-COB

  • 1x RGB strip with remote
  • 1 x PoE+ driver
  • 1x wireless/battery-free light switch

    • Accessories and Tools

    Not Included in Base Kit

    REQUIRED ACCESSORIES:

    • Cat6 Ethernet  (2 cables length < 100m)
    • Single Gang JBOX or low voltage wall ring
    • Wire strippers

    DRAWING SETS

    Download the Kit Drawing Set

    AT-LED-24V-STRIPS
    Kit Includes
    1 x 24V LED driver

    1 x 2.2m 24V 3200K LED strip

    1 x Battery-free Wireless Toggle Light Switch

    500 Sqft Space

    Click Here
    AT-LED-24V-DISC
    Kit Includes
    1 x 24V LED driver

    2 x 6500K LED Disc lights

    1 x Battery-free Wireless Toggle Light Switch

    500 Sqft Space

    Click Here
    AT-LED-24V-BULBS
    Kit Includes
    1 x 24V LED driver

    3 x 2700K LED BULBS

    1 x Battery-free Wireless Toggle Light Switch

    500 Sqft Space

    Click Here
    AT-LED-24V-COB

    1 x AT-LED-24V

    1 x AT-WS-S1

    1 x RGB Strip

    1 x RGB Controller

    1 x RGB Remote

    MOUNTING INSTRUCTIONS

    • Before you mount anything, make sure you pair your light switch or multiple light switches with the AT-LED-24V driver.  See instructions here.
    • If mounting the light switch for flush mounting, identify the light switch mounting location and cut and mount a low voltage ring.
    • Otherwise, simply use the adhesive strip to mount the light switch on a wall.

    Did you know the light switch will come right out of the mount so you can carry it around?

    • The AT-LED-24V can fit into a standard ceiling electrical box, but, as a low voltage device it does not need an enclosure.
    • Pull the PoE+ Ethernet line to the mounting location and connect to the AT-LED-24V.
    • Now’s a great time to make sure you’ve paired your light switch to the LED drivers you’d like to control.
    • Wire up the light fixture or fixtures.
    • Test  your light switch toggles the lights on/off

    Troubleshooting

    • My lights don’t turn on:
      • Make sure the amber light on the AT-LED-24V is on so you know it’s receiving power
      • Double check you have not wired the lights backward.  This happens most often with the LED bulb kits
    • My lights come on, but they’ll randomly shut off
      • Double check you have a PoE+ switch.  Ports will drop out if you have a 12 watt PoE switch
      • Make sure the total power budget on the PoE switch can support the full load of lights you’ve connected to it.  Want to learn more?
    • What happens when the power goes off and comes back on again?
      • The AT-LED-24V is designed to boot to “on”, so if your lights loose power then they’ll turn on again when power is restored.

    PROGRAMMING AND CONFIGURATION

    PAIRING LIGHT SWITCH TO DRIVER: Make sure to pair your light switch to the AT-LED-24V after it is powered on but before you install in an enclosure or somewhere inaccessible.  The amber LED will be on, and the green LED will start off.  Press the AT-LED-24V button for 4-5 seconds.  The green light will turn on, then turn off.  Once the light is off, the AT-LED-24V is in pairing mode, then press the light switch. When the green led flashes 2 times, it means the pairing has been successful. Each AT-LED-24V can pair with up to 42 switches.

    UNPAIRING: Press the AT-LED-24V for 10 seconds, the green LED will turn on, then turn off, then flash 4 times. It means the AT-LED-24V is in factory setting mode.  All pairings have been removed.

    You may consider doing a preliminary wiring before installing the fixtures to sync the light switch.

    Technical Specifications

    AT-LED-24V SPEC SHEETS

    If you find this learning center helpful, like and subscribe on your social channels to learn when we post new guides!

    BT-1-WM and Kits

    BT-1-WM and Kits

    Injector, Technical Center

    Home » PoE Lighting

    BT-1-WM, BT-1-56V120W, BT-3-48V240W, BT-6-48V480W

    Welcome to the PoE Texas Manual for the BT-1-WM, BT-3-48V240W, and BT-6-48V480W that cost-effectively upgrades any non-PoE or PoE port to IEEE 802.3bt and 90 watts!

    The purpose of the manual is to help you quickly and effectively navigate the installation and functions of your new Power Over Ethernet Midspan.

    Our goal is to make our products as intuitive and simple to use as possible, so we value your feedback and questions directly to us at success@poetexas.com.  Phone +1-512-479-0317.

    Or you’re always welcome to leave questions or comments on our product pages: BT-1-56V120W, BT-3-48V240W, BT-6-48V480W

    What’s Inside

    BT-1-WM

    PARTS LIST:

    • 1 X Midspan Injector
    • Din Rail Mounting Brackets

     

    Additional items you’ll need not included:

    1 – DIN rail

    2 – Patch cables to the switch and home run cables to the device.

    https://shop.poetexas.com/collections/tools-and-accessories

    3 – Network Switch

    https://shop.poetexas.com/products/gbts-28-24-m?variant=40620339986591

     

     

     

    BT-1-56v120w

    PARTS LIST:

    • 1 X Midspan Injector
    • Din Rail Mounting Bracket and Screws
    • 56V 120W Power Supply 

    Additional items you’ll need not included:

    1 – DIN rail

    2 – Patch cables to the switch and home run cables to the device

    https://shop.poetexas.com/collections/tools-and-accessories

    3 – Network Switch

    https://shop.poetexas.com/products/gbts-28-24-m?variant=40620339986591

     

    BT-3-48V240W

    PARTS LIST:

    • 1 X Midspan Injector
    • Din Rail Mounting Bracket and Screws
    • 1 X 48V 240W Power Supply (Adjustable up to 56 volts)
    • 1 X 3 Pronged AC Cable

    Additional items you’ll need not included:

    1 – Patch cables to the switch and home run cables to the device

    https://shop.poetexas.com/collections/tools-and-accessories

    3 – Network Switch

    https://shop.poetexas.com/products/gbts-28-24-m?variant=40620339986591

     

     

    BT-6-48V480W

    PARTS LIST:

    • 1 X Midspan Injector
    • Din Rail Mounting Bracket and Screws
    • 1 X 48V 480W Power Supply (Adjustable up to 56 volts)
    • 1 X 3 Pronged AC Cable

     

    Additional items you’ll need not included:

    1 – Patch cables to the switch and home run cables to the device

    https://shop.poetexas.com/collections/tools-and-accessories

    3 – Network Switch

    https://shop.poetexas.com/products/gbts-28-24-m?variant=40620339986591

     

    General Installation

    A midspan like the BT-1-WM and its kit variations are simple to add on to a network port, and the purpose is to add PoE using a wide range of input power to any network.

    With this DIN rail-mounted device, simply mount it on a DIN rail near the networking switch you’d like to pair it with.  Then, use a short Ethernet patch cable from the switch’s data port to the LAN port on the PoE midspan. The POE port adjacent to the LAN port will now have that IEEE 802.3bt (95 watts) power budget and up to 2.5 gigabit pass through data.  Finally, connect the DC power supply to the Phoenix style connector on the top.

    The BT-1-WM also passes grounding through the RJ-45 ports to provide some protection in an ESD event.  However, we recommend only grounding devices at one location, so the kits do not come grounded themselves.

    Not sure what grounding is?  Panduit has some great graphics around grounding.

    CONFIGURATION

    There is no configuration necessary with this device.  Simply plug it in.

    • The amber LED indicates power on and ready to negotiate PoE.  
    • The green LED indicates that the device has negotiated PoE with a Powered Device (PD).

     STEPS TO TROUBLESHOOT:

    1 – At the injector, disconnect the PoE port from your device.  Use a PoE Tester to confirm the device is able to power on using a short jumper cable.

    2 – At the other end of the network cable to your device, disconnect the device and use the PoE Tester to confirm it is able to negotiate PoE.

    3 – Connect the PoE Tester to the end device to monitor power consumption. 

    If you’re able to power on the device with the PoE Tester inline, it’s likely a compatibility issue.  Please contact us at success@poetexas.com to find you the right solution.

    Technical Specifications

    Product Specifications

    Certifications CE/FCC/RoHS ; UL Rating with Power Supply Kits
    Data + PoE Ports 1
    Data Ports 1
    Data Rate 2.5 Gigabit
    DC connector 5.5×2.1 Coaxial ; 18 AWG Push In
    Display Type LED – Amber (PoE Available) ; Green (PoE Negotiated)
    IEC Protection Class IP 40
    Max Current 1.61 Amps
    Max Power for Kit Varies based on the kitted power supply
    Max Voltage 56 volts
    Mount Type Wall ; DIN
    Operating Humidity 20% to 80%
    Operating Temperature Range 0 – 50C
    Output Voltage 56 volts
    PoE Method IEEE 802.3af, IEEE 802.3at, IEEE 802.3bt
    PoE Mode/Pinout Mode A (-1,2 +3,6)/Mode B (+4,5 -7,8)

    If you find this learning center helpful, like and subscribe on your social channels to learn when we post new guides!