Home » Technical Center » WTS-125A

iPad Wall Mount Plus PoE Power Kits

Welcome to the PoE Texas Manual for the WTS-125A, aluminum Wall mounts for the iPad Mini 6 model.  You can now have a surface mounted iPad enclosure with a single cable and no holes in your wall!

The purpose of the manual is to help you quickly and effectively navigate the installation and functions of your new iPad mount kit. 

Our goal is to make our products as intuitive and simple to use as possible. If you have any questions or comments, please email us at success@poetexas.com or give us a call at +1-512-479-0317.

Or you’re always welcome to leave questions or comments on our product page: WTS-125A

What’s Inside

WTS-125A-BK

PARTS LIST:

  • 1 X iPAD WALL MOUNT
  • 4 X WALL ANCHORS
  • 1 X TOOLS

Additional tools and supplies you’ll want to make sure you have are:

  • Drill and 3/8″ drill bit
  • Category Cable wiring tools or some device to strip the shielding off the CAT cable at the tablet end
  • Laser or bubble level
  • Marker or pencil
  • Oh, and don’t forget your iPad!

    WTS-125A-BK and AF-USBC-JB (PoE Adapter Kit)

    PARTS LIST:

    • 1 X iPAD WALL MOUNT
    • 4 X WALL ANCHORS
    • 1 X TOOLS
    • 1 X AF-USBC-JB

    Additional tools and supplies you’ll want to make sure you have are:

    • Drill and 3/8″ drill bit
    • Category Cable wiring tools or some device to strip the shielding off the CAT cable at the tablet end
    • Laser or bubble level
    • Marker or pencil
    • Oh, and don’t forget your iPad!

      General Installation

      This fix-wall mount stand is designed specifically for the iPad mini 6 and features an integrated light indicator component that pairs with our DASH App which you can install at this link. The minimalist design conceals the light display inside the stand, which illuminates with different colors to correspond with various software functions on the tablet.

      1

      2

      3

      4

      5

      6

      7

      8

      9

      10

      11

      12

      13

      14

      15

      16

      17

      18

      19

      20

      21

      Installation Steps

      1 Route PoE compatible Ethernet cable to desired drop site.

      2 Cut and install wall gang box specific for your POE adapter. Double gang box will fit most adapters while the single gang box fits our AF-USBC-JB.

      3 Route Cable through wall gang box.

      4 Mount the desired plate using either the drywall anchor screws provided or mounting directly the Gang Box, (Flush Wall Mount, Angle Wall Mount, Glass Mullion Mount). If Flush mounting, ensure PoE cable and USB-C cable are manageable and no kinks are damaging internal cabling.

      5 Once Wall Mount or Glass mount is in place, attach the iPad mount to the front of the wall mount plate and connect to your device.

      Connecting to Dash App LED

      1 Go to Settings Icon

      2 Click on the Integrations Tab

      3 Select Scan and Choose your device.

      4 You’re ready to start scheduling.

      CONFIGURATION

      The iPAD Mini 6 Wall Mount requires no configuration and should begin charging as soon as you connect it to your iPad.

      TROUBLESHOOTING

      The iPAD Mini 6 Wall Mount is designed to function right out of the box with all the parts necessary to do so.  However, if you are having an issue, here are a couple things to check:

      Not receiving power? 

      1. Check to make sure the integrated USB-C cable is fully connected to the tablet, and to the POE Texas adapter. 
      2. Is your switch/injector rated for the right amount of power? 
        1. The AF-USBC-JB is for 802.3af (15W) POE. The AC-USBC requires 100 to 240 VAC power. Please refer to the adapter’s technical manual for wiring instructions.
        2. For adapter-specific troubleshooting, please refer to the following online manual links:
          1. AC-USBC
          2. AF-USBC-JB
      3. If these steps didn’t solve the problem, give us a call or send us an email so our team can help. 

      Not receiving power and data, or experiencing data issues? 

       

      1. Let’s check to make sure the adapter in your kit is the right one for what you need. 
        1. AC-USBC: Power only
        2. AF-USBC-JB: Power + 10/100 data
      2. For adapter-specific specifications, please refer to the following online manual links:
        1. AC-USBC
        2. AF-USBC-JB
      3. Ensure your Ethernet cable run is under 100 meters (328 feet). 
      1. Under the iPad settings > ‘Face ID & Passcode’ or ‘Touch ID & Passcode’, please make sure the ‘USB Accessories’ or ‘Accessories’ option is turned on. If you are on iOS 26, this has moved to Settings > Privacy & Security > Wired Accessories > Set to Always Allow.
      2. If these steps didn’t solve the problem, give us a call or send us an email so our team can help. 

       

      WARRANTY AND RETURNS
      You can also check out our warranty,  including the free optional extended warranty, and returns on these pages:

      Still Have Questions?  Want Configuration Help?

      Our Customer Success team can always help verify compatibility with your current network infrastructure, our wall mount kits, and your tablet. Feel free to call us at +1 (512) 479-0317 or email us at success@poetexas.com to speak with our POE experts. 

      Technical Specifications

      Product Specifications

      Compatible devices iPad Mini 6 only
      Dimensions 268mm × 184mm × 12mm
      Color Silver and Black
      Cable Type USBC
      Material Aluminium Alloy
      Lights RGB LED
      Data Rate 10/100 mbps
      Efficiency 90%
      Input Voltage Range AC Adapter: 100 – 200V, PoE Adapter 48V – 56V
      Max Power for Kit 15 – 25W Depending on kit selected
      Mount Type Wall and Mullion Mount
      Operating Humidity 5% to 90%
      Operating Temperature Range -10 – 60C
      PoE Method POE-Kit: IEEE 802.3af GAT-Kit: IEEE 802.3af and IEEE 802.3at
      PoE Mode/Pinout GAT-Kit: Mode A/B

      If you find this learning center helpful, like and subscribe on your social channels to learn when we post new guides!