Home » Technical Center » AC-USBC

AC-USBC 100 to 240V AC to USB-C Converter

PoE to USB-C

What’s Inside


  • 1 X AC to USBC Converter
  • 2 X Wire Nuts

The AC-USBC comes with a male USB-C connector and an RJ-45 Connector.

General Installation

Your new USBC converter is designed to be simple to install and set up.  It is small and compact enough to standard wall gang and European wall boxes.

An adhesive or screw anchor is sufficient to hang the adapter on a wall, enclosure or wall gang box.

  1. First make sure power is disconnected to your AC port by flipping the appropriate breaker switch.
  2. Once the power is off, use a volt meter to ensure power has been disconnected.
  3. Connect the black(line) wire to the black(line) wire nut on the AC-USBC. Then connect the white(neutral) wire to the white(neutral) wire nut on the AC-USBC.
  4. Once Connected and tucked in place or mounted, test for power by flipping the breaker and using the volt meter.
  5. Once Voltage is established, you can plug in your USBC device and you will have perfectly safe power converted for your low voltage devices. 

Please note that this device does not operate with Power and DATA. The Device Power profiles are 5v 3amp, 9v 3amp, 12v 2.5amp,15v 2 amp, 20v 1.5amp 

I Want Power and/or Data for my iPad Air, Samsung Tab, or a Power Delivery Device!

Visit Our Full Line of Power Delivery Compatible Devices


There is no configuration necessary with this device.  Simply plug it in.

Technical Specifications

Product Specifications

Cable connector length 5 inches
Cable connectors Wire Nuts, USB-C female
Data + PoE Ports 0 (input)
Data Ports


Data Rate
Connector USB-C Male
Dimensions 2.5x2x1 in.
Input voltage 100 volts to 240 volts
Max. Amps Per Port 3
Operating Humidity 5% to 90%
Operating Temperature Range -10 to 60°C
Output Voltage 5 volts, 9V, 12V, 15V, 20V
PoE Method N/A
PoE Mode/Pinout 0
Power Input Negative and Positive wires
Weight 1 oz

If you find this learning center helpful, like and subscribe on your social channels to learn when we post new guides!