Gigabit PoE Injector Series Manual
Welcome to the Manual for POE Texas Passive Mode B Gigabit PoE Injector Series.
The purpose of the manual is to help you quickly and effectively navigate the installation and functions of your new Power Over Ethernet Gigabit PoE Injector.
Our goal is to make our products as intuitive and simple to use as possible, so we value your feedback and questions directly to us at service@poetexas.com. Phone +1-512-479-0317.
What’s Inside
GPOE-4B
We do offer this injector with a variety of power supplies so you can select a power supply to fit your application needs.
AVAILABLE POWER SUPPLY OPTIONS:
- GPOE-4B-24V30W [Includes 24 volt 30 watt Power Supply]
Additional items you’ll need not included:
1 – Screws for mounting on a wall (optional)
2 – Power supply [see available options above]
3 – Patch cables to the switch and home run cables to the device
NEED HELP PICKING A POWER SUPPLY? USE OUR POE CALCULATOR TO CREATE A POWER BUDGET OR CONTACT A POE-Shifu 512-479-0317.
GPOE-8B
We do offer this injector with a variety of power supplies so you can select a power supply to fit your application needs.
AVAILABLE POWER SUPPLY OPTIONS:
- GPOE-8B-24V60W [Includes 24 volt 60 watt Power Supply]
Additional items you’ll need not included:
1 – Screws for wall mounting [optional]
2 – Power supply [optional- see available options above]
3 – Patch cables to the switch and home run cables to the device
NEED HELP PICKING A POWER SUPPLY? USE OUR POE CALCULATOR TO CREATE A POWER BUDGET OR CONTACT A POE-Shifu 512-479-0317.
General Installation
POE Injectors are a simple device to add into any network, and the purpose is to add or increase the PoE of your network without having to upgrade or pick a less optimal switch.
With this wall mounted device, simply mount it near the networking switch you’d like to pair it with. Then, using a short Ethernet patch cable from the switch’s data port to the LAN port on the PoE midspan.
NOTE: a midspan adds PoE to one data port at a time. So if you connect LAN 1 to a data port on your switch you’ll have Mode A POE on port 1 of the midspan [wait . . . what’s Mode A mean?]. To get POE on port 2, you need to add a patch cable on LAN 2 back to the switch, And so on.
Then connect the POE port to your PoE enabled device.
This is a ACTIVE PoE midspan, meaning it negotiates the IEEE 802.3af/at standard before delivering power. Connecting it to a laptop or other non-PoE device is SAFE for the network card on your device.
Drawing Set
GPOE-4B
GPOE-8B
CONFIGURATION
There is no configuration necessary with this device. Simply plug it in.
The green LED indicates power on. If the green light begins to blink at any time, it is an indication that one of the POE ports has shorted out or overloaded.
STEPS:
1 – Unplug the POE ports one at a time to determine which port is having the issue
2 – Troubleshoot the port to determine whether the cable or the device is grounded
Technical Specifications
GPOE-4B
Product Specifications
| Data + PoE Ports | 4 |
| Data Ports | 4 |
| Data Rate | Gigabit |
| Dimensions | 4 x 1.75 x 1 inches |
| Max. Amps Per Port | 1A |
| Mount Type | Wall |
| Operating Humidity | 5% to 90% |
| Operating Temperature Range | -10 - 60C |
| PoE Method | Passive |
| PoE Mode/Pinout | Mode B (+4,5 -7,8) |
| Power Input | 2.1mm DC |
GPOE-8B
Product Specifications
| Data + PoE Ports | 8 |
| Data Ports | 8 |
| Data Rate | Gigabit |
| Dimensions | 7.2 x 2.5 x 1 in. |
| Input Voltage Range | 24 - 56 Volts DC |
| Max. Amps Per Port | 1 Amp |
| Mount Type | Wall |
| Operating Humidity | 5% to 90% |
| Operating Temperature Range | -10 - 60C |
| PoE Method | Passive |
| PoE Mode/Pinout | Mode B (+4,5 -7,8) |
| Power Input | 2.1 x 5.5 mm DC |
GPOE-8B-24v60w
Product Specifications
| Certifications | UL/CE/FCC |
| Data + PoE Ports | 8 |
| Data Ports | 8 |
| Data Rate | Gigabit |
| Dimensions | 7.2 x 2.5 x 1 in. |
| Input voltage | 24 Volts |
| Max Amps Per Kit | 2.5 Amps |
| Max Power for Kit | 60 Watts |
| Max. Amps Per Port | 1 Amp |
| Mount Type | Wall |
| Operating Humidity | 5% to 90% |
| Operating Temperature Range | -10 - 60C |
| Output Voltage | 24 Volts |
| PoE Method | Passive |
| PoE Mode/Pinout | Mode B (+4,5 -7,8) |
| Power Input | 2.1 x 5.5 mm DC |
| Power Supplies | PS-24v60w |