Home » Technical Center » Injector » GPOE-1B

GPOE-1B

(PoE Gigabit Injector)

Welcome to the PoE Texas Manual for the GPOE-1B that cost effectively upgrades any non-PoE switch or PoE switch to 30 watt passive PoE!

The purpose of the manual is to help you quickly and effectively navigate the installation and functions of your new Power Over Ethernet Midspan. 

Our goal is to make our products as intuitive and simple to use as possible, so we value your feedback and questions directly to us at service@poetexas.com.  Phone +1-512-479-0317.

Or you’re always welcome to leave questions or comments on our product pages: GPOE-1B or GPOE-1B-48V15W or GPOE-1B-48V30W or GPOE-1B-24V30W

What’s Inside

GPOE-1B 

PARTS LIST:

  • 1 X GPOE-1B

This Injector is sold without a power supply. We do offer pre-kitted options, see below.

 

Additional items you’ll need not included:

1 – Screws for mounting

2 – Power supply

3 – Patch cables to the switch and home run cables to the device

 

NEED HELP PICKING A POWER SUPPLY?  USE OUR POE CALCULATOR TO CREATE A POWER BUDGET.

GPOE-1B-48V15W

 

PARTS LIST:

1 X GPOE-1B Midspan Injector

1 X PS-48v15w 48 volt 15 watt DC power supply

 

We do offer this injector by itself without a power supply so you can select a power supply to fit your application needs. 

 

Additional items you’ll need not included:

1 – Screws for mounting

2 – Power supply

3 – Patch cables to the switch and home run cables to the device

GPOE-1B-48V30W

 

PARTS LIST:

  • 1 X GPOE-1B Midspan Injector
  • 1 X PS-48v30w 48 volt 30 watt DC power supply 

 

Additional items you’ll need not included:

1 – Screws for mounting

2 – Power supply

3 – Patch cables to the switch and home run cables to the device

GPOE-1B-24V30W

PARTS LIST:

  • 1 X GPOE-1B Midspan Injector
  • 1 X PS-24v30w 24 volt 30 watt DC power supply

We do offer this injector by itself without a power supply so you can select a power supply to fit your application needs. 

 

Additional items you’ll need not included:

1 – Screws for mounting

2 – Power supply

3 – Patch cables to the switch and home run cables to the device

General Installation

CONFIGURATION

There is no configuration necessary with this device.  Simply plug it in.

The green LED indicates power on.   If the green light begins to blink at any time, it is an indication that one of the POE ports has shorted out or overloaded.

STEPS:

1 – Unplug the POE ports one at a time to determine which port is having the issue

2 – Troubleshoot the port to determine whether the cable or the device is grounded

Technical Specifications

Product Specifications

Data + PoE Ports 1
Data Ports 1
Data Rate Gigabit
Dimensions 1x1x2 in.
Max. Amps Per Port 650 mA
Mount Type wall
Operating Humidity 5% to 90%
PoE Method Passive
PoE Mode/Pinout Mode B (+4,5 -7,8)
PoE Standard N/A
Power Input 2.1mm DC

If you find this learning center helpful, like and subscribe on your social channels to learn when we post new guides!