Home » Technical Center » Powered Devices » GAF-5v10w; GAF-12v12w; Cable Accessories

5 Volt and 12 Volt IEEE 802.3af PoE Splitters

What’s Inside

PARTS LIST: GAF-5V10W

  • 1 X POE SPLITTER

The GAF-5V10W comes with a male 1.35mm x 3.5mm DC barrel connector.

PARTS LIST: GAF-USB

  • 1 X POE SPLITTER
  • 1 X MICRO USB ADAPTER STRAIGHT (ANDROID FAST CHARGE)
  • 1 X FEMALE USB (APPLE FAST CHARGE)

The GAF-USB comes with the adapters you need for fast charging an Android or Apple tablet.  The female USB adapter will charge any 5 watt USB enabled device, but it will only fast charge (12 watts) an Apple device.

PARTS LIST: GAF-Lightning

  • 1 X  1.35mm DC to Lightning Adapter

The GAF-Lightning comes with the adapters you need for fast charging an Apple tablet or phone.  

PARTS LIST: GAF-12v12w

  • 1 X POE SPLITTER FOR 12 VOLT 1AMP (12 WATT) DC POWERED DEVICES [DC BARREL SIZE 2.1mm X 5.5mm]

PARTS LIST: GAF-PTZOptics

  • 1 X POE SPLITTER FOR 12 VOLT 1AMP (12 WATT) DC POWERED DEVICES [DC BARREL SIZE 2.1mm X 5.5mm]
  • 1 X 2.1mm X 5.5mm to EIAJ-04 Connector Adapter

General Installation

Your new PoE splitter is designed to be simple to install and set up.  It is small and light enough to leave “inline” with your network cable.

A adhesive or screw backed cable anchor is sufficient to hang the adapter on a wall or enclosure.

Once it is in place, simply plug the end of your category cable into an IEEE 802.3af PoE or 48-56 volt passive Power Sourcing Equipment (PSE) with a data source (optional), and the other end into your device such as a camera, Raspberry Pi, Ipad, Android tablet, or any compatible device.

Please note that the female USB adapter is configured to fast charge Apple devices only.  It will still charge Android or other USB enabled devices up to 5 watts.  However, it won’t provide the 10-12 watts of fast charge.

I Want Power and Data to My iPad!

Visit Our GAF-Lightning-PD Page

The GAF-Lightning-PD combines the power and data from Power Over Ethernet onto a lightning connector specially designed to fit into tight enclosures to charge the iPad Air and iPad Mini.

I Want Power and Data to My Android/Windows Device

Check out our GAT-USBC-PD Page on PoE to USB Type C devices that transmits both power and data!

CONFIGURATION

There is no configuration necessary with this device.  Simply plug it in.

 

The yellow LED indicates power on the primary side (your PoE side).  The green indicates power on the secondary (5 volt side).

Technical Specifications

Product Specifications

Cable connector length 8.5 inches
Cable connectors RJ45 Male, 1.35mm Male DC
Data + PoE Ports 1 (input)
Data Ports 1
Data Rate Gigabit
DC connector 1.35mm male (power out)
Dimensions 6x1x1.5 in.
Input voltage 44 volts to 57 volts
Max. Amps Per Port 2
Operating Humidity 5% to 90%
Operating Temperature Range -10 to 60°C
Output Voltage 5 or 12 volts
PoE Method Active
PoE Mode/Pinout Mode A (-1,2 +3,6)/Mode B (+4,5 -7,8)
Power Input Female RJ45
Weight 1 oz

If you find this learning center helpful, like and subscribe on your social channels to learn when we post new guides!