Welcome to the PoE Texas Manual for the PoE Detector!
The purpose of the manual is to help you quickly and effectively navigate the functions of your new Power Over Ethernet Detector.
Our goal is to make our products as intuitive and simple to use as possible, so we value your feedback and questions directly to us at service@poetexas.com. Phone +1-512-479-0317.
Or you’re always welcome to leave questions or comments on our product page: POE Detector Tool.
What’s Inside
PARTS LIST:
- POE DETECTOR
PoE Powered inline device – No batteries necessary
Product Features:
- Quickly detect IEEE 802.3af, IEEE 802.3at, 24 Volt Passive and Reverse Polarity Mode B
- Ergonomic and small for easy carry and use – great for any IT professional
- Bright LEDs with easy to read indicator chart located on the product
- PoE Powered inline device – No batteries necessary
NO BATTERIES REQUIRED
SERIOUSLY, NEVER
READING THE DISPLAY
The display shows only voltage for PoE and DC power supplies if no powered device is connected. It will “turn on” an IEEE 802.3aft or at PoE port when the “Simulate PoE device” setting is ON and no powered device connected.
The display shows volts, amps, and watts for 802.3af, 802.3at, passive PoE, and DC power supplies when the tester is connected to a powered device.
Mode A or Mode B indicates which wire pairs transmit the power. See below.
Technical Specifications
Product Specifications
| Connector Types | Female RJ45 |
| Data Rate | N/A |
| Dimensions | 2x1x0.75 in |
| Mount Type | Pocket size |
| Operating Humidity | 5% to 90% |
| Operating Temperature Range | -10 - 60C |
| PoE Method | Powered by PoE |
| PoE Standard | IEEE 802.3af, at, 24 Volt Passive, 48/56 Volt Passive, Reverse Mode B |
| Power Input | Not Required |
| Weight | 0.11 lb |