Welcome to the PoE Texas Manual for the 12-Port 2.5G IEEE 802.3bt 4 Pair PoE Injector!
The purpose of the manual is to help you quickly and effectively navigate the installation and functions of your new Power Over Ethernet Injector.
Our goal is to make our products as intuitive and simple to use as possible, so we value your feedback and questions directly to us at service@poetexas.com. Phone +1-512-479-0317.
Or you’re always welcome to leave questions or comments on our product page: GBT-12-53v1200w
What’s Inside
PARTS LIST:
- 1 X MIDSPAN INJECTOR
- 2 X RACK MOUNT BRACKETS
- 8 X SCREWS (FOR RACK MOUNT)
WHAT YOU NEED:
- 4 X RACK MOUNTING SCREWS AND NUTS
- 24 X 6″ PATCH CABLES TO CONNECT TO THE SWITCH PORTS
- POWER SUPPLY* AND/OR TERMINATION CABLES
* The GBT-12-53v1200w includes an integrated AC-DC power supply for your convenience.
General Installation
Your new PoE injector is designed to be simple to install and set up. You should only need at most a Philips head screw driver and rack screws and/or nuts.
NOTE: The injector does not include the rack mounting nuts or screws. So, you’ll want to grab some of those.
Desktop Installation
The GBT-12-53v1200w doesn’t have much of a “desktop” application, however, you can set it on a desk or a shelf. The unit requires ventilation on the sides and top for maximum efficiency, so we do not recommend stacking other equipment directly on top of it.
You can use stand off feet on a product above it to give room for air circulation.
Rack Installations
The injector comes with brackets for a 19″ rack configuration. Please contact us if you need a different rack. It DOES NOT come with the nuts and screws to mount the injector onto the rack. You’ll need to get those.
Also, a midspan injector DOES NOT manage data. You need one network switch port for each port of the midspan injector. So . . . get at least 24 x 6″ patch cables to connect theGBT-12-53v1200w to the switch ports.
It’s what we call ONE to ONE. Want to learn the difference between an injector and a switch? Check it out here.
STEPS:
- Using rack screws and nuts (not provided) mount the switch into the rack space (the switch will use 1u of rack space)
- Plug the injector into an outlet
- Start plugging in your PoE and non-PoE devices
Technical Specifications
Product Specifications
| AC Plug Connector Type | C14 |
| Adapter length | 3 ft |
| Certifications | UL, FCC, RoHS, CE |
| Data + PoE Ports | 12 |
| Data Ports | 12 |
| Data Rate | 10/100/1000/2500 Mbps (2.5G) |
| Input Frequency Range | 50/60 Hz |
| Input Voltage Range | 53 Volts DC |
| Max Power for Kit | 53 Volts |
| Mount Type | Rackmount injector kit |
| Output Voltage | 53 Volts |
| PoE Method | Active |
| PoE Standard | IEEE 802.3bt Type 4 PoE++ |
| Power Supplies | 2 × 53V 600W UL-approved power supplies |
| Weight | 13.2 |