Home » Technical Center » GATS-10-8-51v120w

Welcome to the PoE Texas Manual for the GATS-10-8-51V120W!

The purpose of the manual is to help you quickly and effectively navigate the installation and functions of your new GATS-10-8-51V120W

Our goal is to make our products as intuitive and simple to use as possible, so we value your feedback and questions directly to us at service@poetexas.com.  Phone +1-512-479-0317.

Or you’re always welcome to leave questions or comments on our product pages: GATS-10-8-51v120w

What’s Inside

PARTS LIST:GBTS-10-8-55V370W

  • 1 X PoE Switch
  • 1 X AC Cable
  • 1 X Manual

 You have everything you need to get your switch up and operating.  Let’s get started.

 

GENERAL INSTALLATION

 

To deploy your new PoE+ or IEEE 802.3at switch, you really only need three key things:

  1. AC power – 120 VAC 60 Hz or 220 VAC 50 Hz – 500 watts
  2. Gigabit Uplink Data on the RJ45 port
  3. Space: 8 3/4″ wide by 6 1/2″ long desk or wall space

* Optional: If you’re wall mounting it, you do need screws and wall anchors.

That’s it!  It’s designed to be a simply, cost effective PoE+ powered switch you can implement quickly.  You don’t need configuration cables, software downloads, apps, or certifications to use it!

 Your switch has eight Gigabit PoE ports, two Gigabit data only ports, and LED indicator lights.  Not a lot to worry about here.  Let’s show you how it goes together.

Put it together:

DESK MOUNT:

If you’re going to set this on a desk or a shelf, you simply place the switch into the location where you need it close enough to the outlet and network connection to your router or switch.

WALL MOUNT:

If you plan to mount this on a wall, simply use two wall screws 7.1″ apart to hang the switch on the wall.  You’ll need a small philips head screwdriver for this.

Now you can plug it in using the included AC cable to power it up.  If you’re grounding your network*, you can use the earthing lug on the back of the switch.*  You might be tempted to overground your network.  Only ground your network in one location and ground it well.  Adding more than one grounding point could actually introduce noise to your network.

Let’s power this thing on and configure it!

CONFIGURATION

Okay, you’re done configuring.  The switch will work right out of the box.

    LED LIGHTS: All the fun blinky lights!

    What you really want to check for is that the LNK/ACT light is blinking properly.  The LED should blink green indicating communication is happening with your device.

    WIRING

    Technical Specifications

    Product Specifications

    AC Plug Connector Type C14
    Adapters included Yes
    Cable connector length 3 ft
    Certifications CE, FCC, RoHS
    Data + PoE Ports 8
    Data Ports 2 Gigabit
    Data Rate Gigabit
    Dimensions 8.74″ x 6.5″ x 1.325″ in.
    Input Voltage Range 120 / 220 VAC
    LEDs Per Port 1 – PoE, Activity
    Max Power for Kit 120 watts
    Mount Type wall and desk
    Operating Humidity 10% to 90%
    Operating Temperature Range -20 – 50 C
    Output Voltage 51 volts
    PoE Method IEEE 802.3af; IEEE 802.3at
    PoE Mode/Pinout Mode A (-1,2 +3,6)
    PoE Standards Supported IEEE802.3, IEEE802.3u, IEEE802.3ab, IEEE802.3z, IEEE802.3az, IEEE802.3x IEEE802.3af, IEEE802.3at
    Storage Temperature -40-80 C

    If you find this learning center helpful, like and subscribe on your social channels to learn when we post new guides!