PARTS LIST: GAF-5V10W
- 1 X POE SPLITTER
The GAF-5V10W comes with a male 1.35mm x 3.5mm DC barrel connector.
PARTS LIST: GAF-USB
- 1 X POE SPLITTER
- 1 X MICRO USB ADAPTER STRAIGHT (ANDROID FAST CHARGE)
- 1 X FEMALE USB (APPLE FAST CHARGE)
The GAF-USB comes with the adapters you need for fast charging an Android or Apple tablet. The female USB adapter will charge any 5 watt USB enabled device, but it will only fast charge (12 watts) an Apple device.
PARTS LIST: GAF-Lightning
- 1 X 1.35mm DC to Lightning Adapter
The GAF-Lightning comes with the adapters you need for fast charging an Apple tablet or phone.
PARTS LIST: GAF-12v12w
- 1 X POE SPLITTER FOR 12 VOLT 1AMP (12 WATT) DC POWERED DEVICES [DC BARREL SIZE 2.1mm X 5.5mm]
Your new PoE splitter is designed to be simple to install and set up. It is small and light enough to leave “inline” with your network cable.
A adhesive or screw backed cable anchor is sufficient to hang the adapter on a wall or enclosure.
Once it is in place, simply plug the end of your category cable into an IEEE 802.3af PoE or 48-56 volt passive Power Sourcing Equipment (PSE) with a data source (optional), and the other end into your device such as a camera, Raspberry Pi, Ipad, Android tablet, or any compatible device.
Please note that the female USB adapter is configured to fast charge Apple devices only. It will still charge Android or other USB enabled devices up to 5 watts. However, it won’t provide the 10-12 watts of fast charge.
I Want Power and Data to My iPad!
Visit Our GAF-Lightning-PD Page
The GAF-Lightning-PD combines the power and data from Power Over Ethernet onto a lightning connector specially designed to fit into tight enclosures to charge the iPad Air and iPad Mini.
I Want Power and Data to My Android/Windows Device
Check out our GAT-USBC-PD Page on PoE to USB Type C devices that transmits both power and data!
There is no configuration necessary with this device. Simply plug it in.
The yellow LED indicates power on the primary side (your PoE side). The green indicates power on the secondary (5 volt side).
|Cable connector length||8.5 inches|
|Cable connectors||RJ45 Male, 1.35mm Male DC|
|Data + PoE Ports||1 (input)|
|DC connector||1.35mm male (power out)|
|Input voltage||44 volts to 57 volts|
|Max. Amps Per Port||2|
|Operating Humidity||5% to 90%|
|Operating Temperature Range||-10 to 60°C|
|Output Voltage||5 volts|
|PoE Mode/Pinout||Mode A (-1,2 +3,6)/Mode B (+4,5 -7,8)|
|Power Input||Female RJ45|