There is no configuration necessary with this device. Simply plug it in.
The green LED indicates power on. If the light turns blue, it indicates the device is drawing more than 60 watts of power.
If the green light begins to blink at any time, it could indicate there is a short in the circuit or a compatibility issue.
STEPS TO TROUBLESHOOT:
1 - At the injector, disconnect the PoE port from your device. Use a PoE Tester to confirm the device is able to power on using a short jumper cable.
2 - At the other end of the PoE cable to your device, disconnect the device and use the PoE Tester to confirm it is able to negotiate PoE.
3 - Connect the PoE Tester in line with the end device to monitor power consumption.
Please contact us at email@example.com (512-479-0317) if you have any questions or need help troubleshooting.