12 to 30 volt to 48 volt PoE Step Up Converter


10/100/1000 Mode B inline step up splitter that converts 12-30 volts to 48 volts

Product Manual Online: Click Here

Got Caught between Ubiquiti Versions or Using Battery Power on a Solar Project?  The GPOE-48v10w Power over Ethernet 48 volt PoE injector powers 802.3af devices from a 12 volt to 30 volt input at Gigabit speeds as an inline device on switches or injectors.

Convert your 24 volt Passive System or 12-30 volt battery power to a regulated 48 volts with an inline device.

Convert existing Battery or 12 volt power sources to PoE for Cameras, Phones and WiFi access points.

Product Description:

  • 2 RJ-45 connectors, one male accepting 12 to 30 volt POE power and data, one female with 48 volt PoE output power and data
  • 2.1mm x 5.5mm DC female power input for 12 volts to 30 volts
  • Two Use and wiring options: Input 12-30v on the DC barrel OR Input 12-30v PoE on the Male RJ45
  • 10 watts output – plenty for all IP Phones and most Cameras
  • Diodes isolate the RJ45 power input from the DC power input
  • Mix 24v and 48v devices on one PoE Texas 24v injector like GPOE-12-24v120w
  • No power supply is included – see our 24v injector products with 1 to 1

Product Use Scenarios:

  1. Convert 12-30v PoE to Regulated 48 volts via the Male RJ45.
  2. Convert 12-30v DC Power source to 48 volts Power over Ethernet. Male RJ45 for 10/100/1000 gigabit data is optional for direct data.

See Also:

GPOE-24v10w for 24 volt Passive PoE applications (Ubiquiti and Mikrotik)

Product Specifications

Certifications CE, FCC, RoHS
Connector Types DC Barrel / RJ-45
Data Rate 10/100/1000
DC connector 5.5 x 2.1 mm DC
Dimensions 1x2x6 in.
Input Voltage Range 12 to 30 volts DC and PoE
Max Power for Kit 10 watts
Max. Amps Per Port 200 mA output
Operating Humidity 5% to 90%
Operating Temperature Range -10 - 60C
Output Voltage 48 volts
PoE Method Passive
PoE Mode/Pinout Input: Mode B (+4,5 -7,8) / Output: Mode A (-1,2 +3,6)
Power Input 2.1 mm DC in / RJ-45 In
Weight 0.14 lb