8 port PoE switch with 24 volt 60 watt power supply
Use this passive PoE switch to power 24 volt devices like Mikrotik and Ubiquiti passive PoE WiFi access points or Ubiquiti cameras. The PoE switch takes power from the included DC power supply and adds it to the Ethernet data cable (Cat5, Cat5e, Cat6) to power your device.
Simplify your installations. One data cable in, up to 7 out. Run a single Ethernet cable up to 328 feet (100 meters) from your existing modem or router and connect to the switch to provide power and data to as many as 7 devices. You can even run them in a series to extend your data reach to more than 600 feet.
Passive PoE means versatility . A Passive PoE injector always delivers the same voltage as its power source. Use this switch with the included 24 volt power supply to power 24-volt passive PoE devices like Access Points from Mikrotik, Ubiquiti, and many more, or swap it with a 48 volt DC power supply (sold separately) and power devices labeled “802.3af”.
Simple, Reliable, and Supported By Experts We design our Power over Ethernet solutions for simple installation and long life, but sometimes things go wrong. When that happens, expert help is only a phone call away, and all of our PoE products are backed with a 1-year replacement warranty and 30-day “no questions asked” return policy.
|Data + PoE Ports||7|
|Max. Amps Per Port||650 mA|
|Operating Humidity||5% to 90%|
|Operating Temperature Range||-10 - 60C|
|Output Voltage||24 volts|
|PoE Mode/Pinout||Mode A (-1,2 +3,6)/Mode B (+4,5 -7,8)|
|Power Input||2.1mm DC|