8 port PoE switch with 19.5 volt 60 watt power supply
Power Zmodo cameras and other SPOE devices through a network data cable using this passive Power over Ethernet (PoE) capable network switch. The PoE switch takes power from the included DC power supply and adds it to the Ethernet data cable (Cat5, Cat5e, Cat6) to power your device.
Simplify your installations. One data cable in, up to 7 out. Run a single Ethernet cable up to 328 feet (100 meters) from your existing modem or router and connect to the switch to provide power and data to as many as 7 devices. You can even run them in a series to extend your data reach to more than 600 feet.
Passive PoE means versatility . A Passive PoE injector always delivers the same voltage as its power source. Pair this switch with a 48 volt DC power supply to power devices labeled “802.3af”, or you can use a 24 volt power supply with 24-volt passive PoE devices like Access Points from Mikrotik, Ubiquiti, and many more.
Simple, Reliable, and Supported By Experts We design our Power over Ethernet solutions for simple installation and long life, but sometimes things go wrong. When that happens, expert help is only a phone call away, and all of our PoE products are backed with a 1-year replacement warranty and 30-day “no questions asked” return policy.
|Data + PoE Ports||7|
|Max. Amps Per Port||650 mA|
|Operating Humidity||5% to 90%|
|Operating Temperature Range||-10 - 60C|
|Output Voltage||5 volts|
|PoE Mode/Pinout||Mode A (-1,2 +3,6)/Mode B (+4,5 -7,8)|
|Power Input||2.1mm DC|