POE-PiHat

Raspberry Pi HAT "Hardware Attached on Top" Accessory

$25.99

Description

Raspberry Pi HAT "Hardware Attached on Top" Accessory

PoE Texas has produced a more flexible PiHat accessory than the Official one from Raspberry Pi. Now you can send use passive PoE from 15 volts up to 56 volts over an Ethernet cable to power your Pi project.

Product Features:

  • Fits Raspberry Pi 3 B+ and Raspberry Pi 4 (Not Included)
    • Works with passive PoE injectors from 15 – 56 volts. Also compatible with 12volts, however you MUST limit your power output to 2.4 Amps (**If the power goes above 2.4 Amps, the Raspberry Pi will STOP WORKING**)
    • Provides a regulated 5 volts 2.4 amp with solder pads on top for a DC bus
    • Ideal for integration with Solar and Battery systems
  • Optocoupled with flyback topology to prevent shorting the board

Simple, Reliable, and Supported By Experts We design our Power over Ethernet Injectors for simple installation and long life, but sometimes things go wrong. When that happens, expert help is only a phone call away, and all of our PoE products are backed with a 1-year replacement warranty and 30-day “no questions asked” return policy.

Product Specifications

Certifications CE, FCC
Connector Types Two 4 pin x 1 mm
Data Rate 10/100/1000
Efficiency 90%
Max Current 270 mA
Mount Type Board Mounted
Operating Temperature Range 10-90% non condensing
OperatingTemperature Range 0 - 40C
Output Voltage 5 volt 3 Amp
Power Input Mode B 4,5+,7,8-
Weight 1 oz
x