WT-MMF-RJ45

RJ45 y-cable for PoE

$16.95

RJ45 Combiner/Splitter Kit - Use one Ethernet cable for two devices.

  • RJ45 Combiner / Splitter kit carries two data lines on one Cat 5e/6 cable to two remote devices
  • Uses two Switch ports for one Combiner, and Splitter separates the signal at the device end
  • Supports 10/100 data rates for each circuit
  • Supports Mode A power only (1,2,3,6)
  • Allows PoE with 802.3af or 802.3at supported (up to 60 watts possible if used with the WT-AT-4)
-Important Notes
- Each connected device requires a separate router/switch port
- only 10/100 is supported over 2 pairs according to Ethernet standards
- The WiFi-Texas brand supports 802.3af PoE applications
- Complatible with injectors and switches that use Mode A for power (is not compatible with our passive mode B injectors)

 

Specifications for dual LAN use
- Long run connection 1 x 8P/8C RJ45 Female
- Device/Switch Connector: 2 x 4P/4C RJ45 Male
- Cable Rating: Cat 5e
- Max Speed Rating: 100Mb
- 25 watts per circuit if CAT-6 is used

uPoE usage
- Use with the WT-AT-4 or WT-AT-8 devices to provide 60 watts of power 
- Combines two 802.3at ports into one uPoE port
- Max Speed Rating: 100Mb in uPoE usage
- Requires two ports on the PoE side of the WT-AT-4 device
- No splitter required at the remote device

Package Contents
2 x RJ45 Combiner/Splitter

Product Specifications

Connector Types Female RJ45 x 1, Male RJ45 x 2
Dimensions 1x1x5 in.
Max Voltage 56 volts
Max. Amps Per Port 1
Operating Humidity 5% to 90%
PoE Mode/Pinout Female RJ45 - Mode A (-1,2 +3,6)/Mode B (+4,5 -7,8) 1 Male RJ45 - Mode A (-1,2 +3,6) 1 Male RJ45 - Mode B (+4,5 -7,8)