WT-AT-4-56V60W

Gigabit 4 port PoE Injector with 56 volt 60 watt power supply

$69.95

Gigabit Active, Mode A 4 Port Injector with a 56 volt 60 watt power supply

Use these 56 volt Power over Ethernet (PoE) devices with high-powered Access Points and PTZ cameras. These fully 802.3at compliant injectors work with Cisco products and any other IP cameras, VOIP phones, WiFi access points required 802.3at or 802.3af PoE.

Save big on network upgrades and device installations Power over Ethernet delivers power 328 feet from the PoE Injector, eliminating the expense and hassle of installing AC power near your powered device. With this PoE Injector, you can add power to your data cable for a fraction of the cost of upgrading to a PoE capable network switch.

Active PoE means the right power at the right time . An active PoE injector negotiates with the powered device to deliver the voltage needed, so there are no concerns about accidentally burning out lower powered or non-PoE devices. Power is only added to the data cable when an 802.3af or 802.3at device is connected.

Simple, Reliable, and Supported By Experts We design our Power over Ethernet Injectors for simple installation and long life, but sometimes things go wrong. When that happens, expert help is only a phone call away, and all of our PoE products are backed with a 1-year replacement warranty and 30-day “no questions asked” return policy.

Product Specifications

Certifications UL/CE/FCC
Data + PoE Ports 4
Data Ports 4
Data Rate Gigabit
Dimensions 8x4x4 in.
Max Amps Per Kit 1 Amp
Max Power for Kit 60 Watts
Max. Amps Per Port 550 mA
Mount Type wall
Operating Humidity 5% to 90%
Operating Temperature Range -10 - 60C
Output Voltage 56 volts
PoE Method Active
PoE Mode/Pinout Mode A (-1,2 +3,6)
Power Input 2.1mm DC
Power Supplies WS-PS-56v60w