There is no configuration necessary with this device. Simply plug it in.
The green LED indicates power on and drawing less than 30 watts. If the light turns blue, it indicates the port is drawing more than 30 watts of power.
If the green light begins to blink at any time, it could indicate there is a short in the circuit or a compatibility issue.
STEPS TO TROUBLESHOOT:
1 - At the injector, disconnect the PoE port from your device. Use a PoE Tester to confirm the device is able to power on using a short jumper cable.
2 - At the other end of the network cable to your device, disconnect the device and use the PoE Tester to confirm it is able to negotiate PoE.
3 - Connect the PoE Tester to the end device to monitor power consumption.
If you're able to power on the device with the PoE Tester inline, it's likely a compatibility issue. Please contact us at firstname.lastname@example.org to find you the right solution.