Passive-PoE

Find Your Passive PoE Device

You can find passive PoE midspans and switches that range from 12 volts (not usually recommended) to 24 volts (Ubiquiti and Mikrotik) to 56 volts (Back haul devices from Ubiquiti and Mimosa or most IEEE 802.3at devices).

You can use our configurator tool online to search for products that match your device or use the filters at the bottom (mobile version).

Sold Out GPOE-16A-56V240W
GPOE-16A-56V240W

Injector Kit

GPOE-16A-56V240W

GPOE-16A-56V240W

$283.99

Gigabit, Mode A, rack mount 16 Port Injector with two 56 volt 120 watt power supplies Use these passive 56 volt 802.3at compatible Power over Ethernet injectors with high-powered devices like PTZ cameras and non-Cisco WiFi-Access points. For Cisco devices, see our Active injectors (WT-AT-4 and WT-AT-8). Save big on network upgrades and device in...


More Details
GPOE-16A-48V240W

GPOE-16A-48V240W

$233.99

Gigabit, Mode A, rack mount 16 Port Injector with two 48 volt 120 watt power supplies Power IP cameras, desktop phones, WiFi access points, or other low voltage devices through a network data cable using this Power over Ethernet (PoE) injector. The PoE Injector takes power from the 48 volt power supply and adds it to the Ethernet data cable (Cat...


More Details
GPOE-16A-56V120W

GPOE-16A-56V120W

$221.99

Gigabit, Mode A, rack mount 16 Port Injector with a 56 volt 120 watt power supply Use these passive 56 volt 802.3at compatible Power over Ethernet injectors with high-powered devices like PTZ cameras and non-Cisco WiFi-Access points. For Cisco devices, see our Active injectors (WT-AT-4 and WT-AT-8). Save big on network upgrades and device instal...


More Details
POE-5v-12x

POE-5v-12x

$212.99

5 volt PoE kit for 12 devices Power your iPads, Android tablets, Raspberry Pi, and other 5 volt/USB devices from your existing PoE switch or use one of our PoE Injector/Splitter kits. Perfect for conference rooms, kiosks, and anywhere else you need a digital display Power your iPads, Android tablets, and other USB devices from your existing PoE ...


More Details
POE-12v-12x

POE-12v-12x

$207.99

10/100, Mode B, rack mount 12 Port Injector with a 24 volt 120 watt power supply and 12 10/100 12 volt 1 amp PoE splitters Power 12 volt non-PoE devices like Foscam outdoor cameras and more. The 24 volt PoE injector send power and data to the 12 volt splitter, which lowers the voltage to meet the needs of your powered device. This method allows ...


More Details
GPOE-16AB-24V120W

GPOE-16AB-24V120W

$195.99

Gigabit, Mode A/B, rack mount 16 Port Injector with a 24 volt 120 watt power supply Use this passive Power over Ethernet injector to power 24 volt devices like Mikrotik and Ubiquiti passive PoE WiFi access points, Ubiquiti cameras The PoE Injector takes power from the 24 volt DC power supply and adds the same voltage to your Ethernet data cable ...


More Details
GPOE-12AB-56V120W

GPOE-12AB-56V120W

$186.99

Gigabit, Mode A/B, rack mount 12 Port Injector with 56 volt 120 watt power supply Use these passive 56 volt 802.3at compatible Power over Ethernet injectors with high-powered devices like PTZ cameras and non-Cisco WiFi-Access points. For Cisco devices, see our Active injectors (WT-AT-4 and WT-AT-8). Save big on network upgrades and device instal...


More Details
GPOE-16A-48V120W

GPOE-16A-48V120W

$181.99

Gigabit, Mode A, rack mount 16 Port Injector with a 48 volt 120 watt power supply Power IP cameras, desktop phones, WiFi access points, or other low voltage devices through a network data cable using this Power over Ethernet (PoE) injector. The PoE Injector takes power from the 48 volt power supply and adds it to the Ethernet data cable (Cat5, C...


More Details
x