4 port Gigabit PoE Switch with IEEE 802.3bt Uplink Power with 1 Port 4 Pair PoE Injector


4 port Gigabit PoE Extender with IEEE 802.3bt Uplink Power (Includes 4 Pair PoE Injector kit)

Expand your powered network with a single Ethernet cable. Rather than limiting your device options because of the cost of adding infrastructure, this high powered pass through PoE switch allows you to add devices and capacity anywhere on your network. Power up to four IEEE 802.3af standard IP cameras, desktop phone, WiFi access point, or other low voltage devices over 600 feet from PoE source. Use the Uplink port with 4-Pair PoE to extend power and data from your existing 802.3bt switch to support 4 802.3af (15 watt) devices in one unit.  

Don't have IEEE 802.3bt? Not a problem. The GPOES-EX2005-60w-Kit comes with our passive 4 Pair PoE injector with up to 60 watts needed to utilize all 4 ports of the GPOES-EX2005.

Product Features:

  • Plug and Play kit includes 60 watt PoE injector. The GPOES-EX2005-60w-Kit comes with our passive 4 Pair PoE injector with up to 60 watts 
  • Node Centric PoE - Uses 4PPoE to extend power to 2 PoE+ (802.3at) Devices or 4 802.3af Devices
  • Use to extend power and data up to 200 Meters
  • Includes a 48 volt UL/CE/FCC certified power supply
  • Auto detects non-PoE devices, protecting them from accidentally being damaged
  • Full rate 10/100/1000 network throughout extended distance

Product Specifications

Adapters included GPOE-1AB Passive Injector; 2.1 mm Y-Cable
Certifications CE, FCC / Power Supply UL
Data + PoE Ports 4
Data Ports 1
Data Rate Gigabit
DC connector 2.1mm x 5.5mm
Dimensions With Mounting Brackets: 7.25 x 3.75 x 1.15
Input voltage 48 Volts PoE via uplink port
LEDs Per Port 2 - Connections and activity
Max Power for Kit 60 Watts total (15 watts per port)
Max. Amps Per Port 0.3125 mA
Mount Type Wall
Operating Humidity 5% to 90%
Operating Temperature Range -10 - 45C
PoE Method IEEE 802.3bt/4PPoE (Uplink) / IEEE 802.3af LAN
PoE Mode/Pinout Mode A (-1,2 +3,6)/Mode B (+4,5 -7,8)
PoE Standard Injector: Passive 4 Pair PoE / Switch IEEE 802.3bt and IEEE 802.3af
Power Supplies PS-48v60w; 48 Volt 60 Watt DC